graps 2017-01-30 11:45:15
ctc: Maybe you need to place a modification in the /etc or specific file. Try this link: http://linoxide.com/how-tos/linux-set-access-control-list-using-setfacl-and-getfacl-commands/
bibble 2017-01-30 11:49:15
debian 8 + xfce; when using hdmi to tv and using vlc, after 10 minutes or so the screen goes blank. moving the mouse unblanks. how to stop ? disabled screensaver and run 'setx s off' && 'setx s noblank'
fryguy 2017-01-30 11:50:13
bibble: you'll want to turn off dpms, as well as screen blanking
hicks__ 2017-01-30 11:50:37
Settings/Power Manager
hicks__ 2017-01-30 11:50:52
display tab, set all to never and untick handle display power management.
hicks__ 2017-01-30 11:50:56
beyond that, I'm not sure.
Kafei 2017-01-30 11:51:18
That should indeed be all you need to do
bibble 2017-01-30 11:51:30
ohh, interesting. thanks fryguy. plugged in, seems to be the default settings hicks__ :)
bibble 2017-01-30 11:51:50
Ok, great Kafei :)
nintendo3DS 2017-01-30 12:01:09
the wpa network I'm trying to connect to from the command line uses a username/password and not a key, but the guides I find for doing so all assume the network uses a key and no username
teraflops 2017-01-30 12:03:16
wpa enterprise uses user/password
teraflops 2017-01-30 12:03:24
nintendo3DS: EDUroam or something similar?
nintendo3DS 2017-01-30 12:03:49
not sure, it's a college wifi
bibble 2017-01-30 12:04:03
nintendo3DS: may need to use a file
dondelelcaro 2017-01-30 12:04:18
nintendo3DS: you can still configure that using wpa_supplicant or networkmanager if you want
dondelelcaro 2017-01-30 12:04:54
nintendo3DS: man wpa_supplicant.conf; example #2 is most likely what it is.
dondelelcaro 2017-01-30 12:05:08
nintendo3DS: you don't need to speicfy the phase1/phase2 or the ca_cert in that example
nintendo3DS 2017-01-30 12:05:33
thanks
dondelelcaro 2017-01-30 12:06:29
nintendo3DS: if you're using networkmanager, it's easiest to use one of the GUIs, but if you really want, you can edit the configuration files manually and enable them
missmbob 2017-01-30 12:14:25
nintendo3DS: if you're using networkmanager but aren't in X, nmtui is really great. definitely better than messing with config files
hassoon 2017-01-30 12:15:23
missmbob: nm-applet too
mad_hatter 2017-01-30 12:36:54
somiaj: so if i can't get my card working withthe base image on the net install how can i download the newer backporter kernel for jessie and the firmware?
somiaj 2017-01-30 12:37:08
mad_hatter: amd64?
mad_hatter 2017-01-30 12:37:13
yes
somiaj 2017-01-30 12:37:27
mad_hatter: https://packages.debian.org/jessie-backports/linux-image-4.8.0-0.bpo.2-amd64
somiaj 2017-01-30 12:37:33
mad_hatter: https://packages.debian.org/jessie-backports/linux-image-4.8.0-0.bpo.2-amd64
somiaj 2017-01-30 12:37:49
mad_hatter: https://packages.debian.org/jessie-backports/firmware-realtek
somiaj 2017-01-30 12:38:00
mad_hatter: those three packages should be all you need, copy them over, then dpkg -i them
somiaj 2017-01-30 12:38:09
mad_hatter: check the firwmare page, see if your chipset is listed.
mad_hatter 2017-01-30 12:38:29
right, so when i get base image installed from the netinstal...i wont have internet...how will i be able to retrieve those pkgs
somiaj 2017-01-30 12:40:01
mad_hatter: another computer, copy them over via a usb drive
mad_hatter 2017-01-30 12:40:10
no computer and only one usb drive
mad_hatter 2017-01-30 12:40:13
that's the crux of my problem
somiaj 2017-01-30 12:40:30
mad_hatter: it won't matter if you use the netintsall or even dvd1, you'll have to do that to get the newer kernel/firmware
mad_hatter 2017-01-30 12:40:46
yeah that's my predicament hahah
somiaj 2017-01-30 12:40:57
mad_hatter: you don't have a wired nic? A usb dongle? You can partition the remaining space after putting the installer on the usb drive and put it there.
Brigo 2017-01-30 12:41:00
what about the testing installer?
mad_hatter 2017-01-30 12:41:09
is there a way i can load the netinstall, the newer kernel, and the firmware all onto a single usb drive?
somiaj 2017-01-30 12:41:11
Brigo: I don't think they have firmware images for that yet?
mad_hatter 2017-01-30 12:41:19
somiaj: i have a wired nic, just no wire
Brigo 2017-01-30 12:41:22
let's check
somiaj 2017-01-30 12:41:56
mad_hatter: after you cp net.iso /dev/sdX, you should be able to create another partition on the remaining space left on the drive -- though I hvaen't tested this in a while, and only recall doing it with live images
Brigo 2017-01-30 12:41:58
it looks like they don't :/
somiaj 2017-01-30 12:42:11
Brigo: was afraid of that.
Brigo 2017-01-30 12:42:30
i thought it was a problem of kernel version, not drivers.
bazhang 2017-01-30 12:42:47
he could a usb stick with persistent
Brigo 2017-01-30 12:43:10
bazhang, in a live
bazhang 2017-01-30 12:43:27
Brigo, I meant the other guy
somiaj 2017-01-30 12:43:36
mad_hatter: are you using this computer now, do you plan to format the whole drive? You could make a small partion on your drive and store the .deb's there.
somiaj 2017-01-30 12:43:51
mad_hatter: but it would be nice to have a backup plan if this dosen't work.
mad_hatter 2017-01-30 12:44:00
yes, i will be using this computer and yes, plan on using the whole drive
Brigo 2017-01-30 12:44:45
isn't there any options in advanced about choosing a kernel?
somiaj 2017-01-30 12:44:50
mad_hatter: well we have given you a few solutions, you'll have to decide which is best for your situation.
